网站转让

怎么更换汽车摇控钥匙防盗器外壳，汽车摇控钥匙外壳如何拆卸--安裝选购以前大家先要弄清楚自身遥控器的型号规格，大家用小螺丝起子将损坏的那一个遥控器反面螺钉扭开。新买的遥控器报警器外壳拿到手后，大家先与此同时按住开门和闭店的两个按键，记牢要与此同时按住。大约２秒后，上边的信号指示灯会迅速闪动。
How to replace the car remote control key anti-theft device shell, and how to disassemble the car remote control key shell -- before installation and purchase, we should first find out the model and specification of our own remote control, and use a small screwdriver to open the screw on the back of the damaged remote control. After you get the new remote control alarm shell, press and hold the two buttons to open and close the store at the same time. Remember to press and hold them at the same time. After about 2 seconds, the signal indicator above will flash quickly.
再按一下开门或闭店按键，信号指示灯会闪一下就灭，证实大家早已把该遥控器早已清零了。大家再逐渐给开门按键和闭店按键对上数据信号，我们可以先按住有数据信号的那一个遥控器的开门按键，再不断的按买回去的遥控器的开门按键，从头开始死对头到要对的遥控器腹部，不一样就重换一个地区。当买回去的遥控器信号指示灯不断闪动时，证明就对上。
Press the open or close button again, and the signal indicator light will flash and go out, confirming that everyone has already cleared the remote control. We can gradually match the data signal to the door opening button and the store closing button. We can first press and hold the door opening button of the remote control with the data signal, and then constantly press the door opening button of the remote control we bought back. From the beginning, from the enemy to the abdomen of the remote control, we can change another area. When the signal indicator light of the remote control you bought keeps flashing, the certificate is right.