如果机房不使用温湿度控制器、湿度控制表进行温湿度控制,当机房温度过低时,部分IT设备将无法正常运行,在一定程度上会影响企业生产的正常运作。除了低温会导致IT设备不运行,还会有绝缘、材料、电池等都会出现问题。详细点来说呢,就是低温时,绝缘材料会变硬、变脆,使结构强度同样减弱。对于轴承和机械传动部分,由于其自身所带的润滑油受冷凝结,黏度增大而出现黏滞现象。温度过低时,含锡量高的焊剂会发生支解,从而降低
锈钢铸件 螺杆式启闭机 保定搬家 电缆挂钩 冲压机 防撞护栏模具电气连接的强度,甚至出现脱焊、短路等故障。所以,对于机房生产来说,使用温湿度控制器、湿度控制表有着举足轻重的作用。
If the computer room does not use the temperature and humidity
controller and humidity control table to control the temperature and
humidity, when the computer room temperature is too low, some IT
equipment will not operate normally, which will affect the normal
operation of enterprise production to a certain extent. In addition to
low temperature will cause it equipment not to run, there will be
insulation, materials, batteries and other problems. In detail, at low
temperature, the insulating material will become hard and brittle, which
will also weaken the structural strength. As for the bearing and
mechanical transmission part, the viscosity of the lubricating oil is
increased due to the cold condensation. When the temperature is too low,
the flux with high tin content will disintegrate, which will reduce the
strength of electrical connection, and even lead to desoldering, short
circuit and other faults. Therefore, the use of temperature and humidity
controller and humidity control table plays an important role in the
production of computer room